Loading...

+91-22-6797 5484 / 85

response@smartechelectronics.com

production-status-banner-picture

In today’s business environment, communication needs to be instantaneous, interactive and proactive allowing employees to create timely decisions based on up to the minute facts of the manufacturing process.

Smartech iLine Series LED Display boards display real time production data, enhancing visual communication and increasing production efficiency.






Models

iLINE-TGA

  Target and Shift Duration can be set manually using Infrared remote control.

  Goal is calculated automatically based on the Target and Shift Duration.

  Actual increments every time 12V pulse is received on the Input Contacts.

  Can be customised as per requirement

iLine-TGA
iLine-PSA

iLINE-PSA

  Up to 3 shifts with 3 breaks per shift can be defined

  Cycle time can be set individually for each shift.

  Embedded software calculates real time target, gap, efficiency, etc.

  Auto reset of the real time target and actual at the start of each shift.

  Real time target suspends during the break timings.

  Infrared remote control for programming of shift timings, target,etc.

  Input for increment of actual production

  Previous shift actual production can also be displayed

  Highly accurate real time clock..

  Can be customised as per requirement

iLINE-AR

  Start and finish time of shift can be set manually.

  Target Qty. and Target Period can also be set manually.

  Auto reset of the Expected and Current Output at the Start of the Shift.

  Potential free Input for increment of Current Output.

  Expected Output, Balance Output and Asking Rate are calculated automatically.

  Highly accurate real time clock.

  Can be customised as per requirement

iLine-AR
date-time

iLINE-TDM

  Start and finish time of shift can be set manually.

  Daily and Month Target can be set manually.

  Daily and Month Actual can be reset manually

  Daily and Month Actual increments every time there is an input pulse.

  Highly accurate real time clock.

  Safety and Quality Slogans can be scrolled on the bottom line.

  Can be customised as per requirement

iLINE-TAKT

  Up to 3 shifts with 3 breaks per shift can be defined.

  Cycle time can be set individually for each shift.

  Auto reset of the real time target and actual at the start of each shift.

  Real time automatically increments after every cycle time.

  TAKT loads with cycle time after receiving input and countdowns.

  Tower Light and buzzer turns ON when the TAKT reaches 0.

  Real time target and TAKT suspend during the break timings.

  Infrared remote control for programming of shift timings, target, etc.

  Input for increment of actual production.

  Highly accurate real time clock..

  Can be customised as per requirement

iLine-TAKT

Specifications



Digit Height 1”/2.3”/4”/6”/12”
Digit Colour Red
Display Visibility Indoor /Outdoor
Programming Infrared Remote Control
Inputs 1-4
Optional Communication Interfaces TCP/IP/ RS232/RS485*
Tower Light with Buzzer Optional
Operating Voltage 230V A.C.